NAME

docs/dev/jit_i386.pod - Parrot JIT (i386/gcc)

ABSTRACT

This PDD describes the i386 gcc JIT implementation.

DESCRIPTION

JIT i386/gcc is a combination of unrolled assembly instructions and the Computed Goto Predereferenced (CGP) run loop. For branch instructions the function implementation in the standard core is called.

Another difference of JIT/i386 is that most vtable functions are JITed instructions which use register mappings.

For a better understanding of the control flow between these basically 3 run loop cores, an example shows the gory details.

EXAMPLE

Given the following PASM program, the righthand three columns show where each opcode gets executed:

        PASM                 JIT ops   Normal     CGP ops
	set I0, 10           # set_i_ic
	print I0             # (call)               print_i
	print "\n"           #                      print_sc
        new P1, 'ResizableIntegerArray'
	local_branch P0, inc # (call) local_branch_p_ic  cpu_ret
	end                  # (jmp) HALT           end (ret)
	                     # end (ret)
  inc:
	inc I0               # inc_i
	new P0, 'String'     # new_p_sc
	set P0, I0           # set_p_i
	print P0             # (call)               print_p
	print "\n"           #                      print_sc
	local_return P1      # (call) local_return_p     cpu_ret

Startup sequence

In runops_jit a prederefed copy of the opcode stream is built by init_prederef. Then build_asm generates the assembler code sequence as usual. This generated code (shown as runops_jit in ddd) is then executed.

Generate minimal stack frame, save %ebx

    0x812c510 <jit_func>:       push   %ebp
    0x812c511 <jit_func+1>:     mov    %esp,%ebp
    0x812c513 <jit_func+3>:     push   %ebx

Get the program counter to %ebx

    0x812c514 <jit_func+4>:     mov    0xc(%ebp),%ebx

Push interpreter and (opcode_t*) 1 and call cgp_core

    0x812c517 <jit_func+7>:     push   $0x8113db8
    0x812c51c <jit_func+12>:    push   $0x1
    0x812c521 <jit_func+17>:    mov    $0x1,%eax
    0x812c526 <jit_func+22>:    call   0x80b5830 <cgp_core>

In cgp_core all callee saved registers are saved.

    0x80b5830 <cgp_core>:       push   %ebp
    0x80b5831 <cgp_core+1>:     mov    %esp,%ebp
    0x80b5833 <cgp_core+3>:     sub    $0xdc,%esp
    0x80b5839 <cgp_core+9>:     lea    0x8(%ebp),%eax
    0x80b583c <cgp_core+12>:    push   %edi
    0x80b583d <cgp_core+13>:    push   %esi
    0x80b583e <cgp_core+14>:    push   %ebx

In %eax the init flag is set to -1

    0x80b583f <cgp_core+15>:    mov    %eax,0xfffffff

The parameter *cur_op (the program counter) is put into %esi and ...

    0x80b5842 <cgp_core+18>:    mov    0x8(%ebp),%esi
    0x80b5845 <cgp_core+21>:    test   %esi,%esi
    0x80b5847 <cgp_core+23>:    jne    0x80b5853 <cgp_core+35>
    0x80b5849 <cgp_core+25>:    mov    $0x810ca60,%eax
    0x80b584e <cgp_core+30>:    jmp    0x80bb470 <cgp_core+23616>

... compared to 1

    0x80b5853 <cgp_core+35>:    cmp    $0x1,%esi
    0x80b5856 <cgp_core+38>:    jne    0x80b5860 <cgp_core+48>

If true, the program jumps to the return address of above function call, i.e. it jumps back again to JIT code.

    0x80b5858 <cgp_core+40>:    jmp    *0x4(%ebp)

Back again in JIT code, the init flag is checked

    0x812c52b <jit_func+27>:    test   %eax,%eax
    0x812c52d <jit_func+29>:    jne    0x812c536 <jit_func+38>

... and if zero, the function would be left.

 [   0x812c52f <jit_func+31>:   pop    %ebx          ]
 [   0x812c531 <jit_func+33>:   mov    %ebp,%esp     ]
 [   0x812c533 <jit_func+35>:   pop    %ebp          ]
 [   0x812c535 <jit_func+37>:   ret                  ]

When coming from the init sequence, program flow continues by checking the resume_offset and jumping to the desired instruction

    0x812c536 <jit_func+38>:    mov    %ebx,%eax
    0x812c538 <jit_func+40>:    sub    $0x400140c0,%eax
    0x812c53e <jit_func+46>:    mov    $0x812c4a8,%edx
    0x812c543 <jit_func+51>:    jmp    *(%edx,%eax,1)

set I0, 10 and save_registers

    0x812c546 <jit_func+54>:    mov    $0xa,%ebx
    0x812c54b <jit_func+59>:    mov    %ebx,0x8113db8

Now non-JITed code follows -- get the address from the prederefed op_func_table and call it:

    0x812c551 <jit_func+65>:    mov    $0x812ac0c,%esi
    0x812c556 <jit_func+70>:    call   *(%esi)

    inline op print(in INT) {
      printf(INTVAL_FMT, (INTVAL)$1);
      goto NEXT();
    }

where the goto NEXT() is a simple:

    0x80b5b49 <cgp_core+793>:   jmp    *(%esi)

    op print(in STR) {
     ...
      goto NEXT();
    }

As the last instruction of the non-JITed code sequence is a branch, this is not executed in CGP, but the opcode:

    inline op cpu_ret() {
    #ifdef __GNUC__
    # ifdef I386
       asm("ret")

is executed. This opcode is patched into the prederefed code stream by Parrot_jit_normal_op at the end of a non-JITed code sequence. This returns to JIT code again, where the next instruction gets called as a function in the standard core ...

    0x812c558 <jit_func+72>:    push   $0x8113db8
    0x812c55d <jit_func+77>:    push   $0x400140dc
    0x812c562 <jit_func+82>:    call   0x805be60 <Parrot_bsr_ic>
    0x812c567 <jit_func+87>:    add    $0x8,%esp

... and from the return result in %eax, the new code position in JIT is calculated and gets jumped to:

    0x812c56a <jit_func+90>:    sub    $0x400140c0,%eax
    0x812c570 <jit_func+96>:    mov    $0x812c4a8,%edx
    0x812c575 <jit_func+101>:   jmp    *(%edx,%eax,1)

Now in the subroutine inc:

    0x812c580 <jit_func+112>:   mov    0x8113db8,%ebx
    0x812c586 <jit_func+118>:   inc    %ebx

Save register and arguments and call pmc_new_noinit:

    0x812c587 <jit_func+119>:   push   %edx
    0x812c588 <jit_func+120>:   push   $0x11
    0x812c58d <jit_func+125>:   push   $0x8113db8
    0x812c592 <jit_func+130>:   call   0x806fc60 <pmc_new_noinit>

put the PMC* into Parrot's register:

    0x812c597 <jit_func+135>:   mov    %eax,0x8113fb8

and prepare arguments for a VTABLE call:

    0x812c59d <jit_func+141>:   push   %eax
    0x812c59e <jit_func+142>:   push   $0x8113db8
    0x812c5a3 <jit_func+147>:   mov    0x10(%eax),%eax
    0x812c5a6 <jit_func+150>:   call   *0x18(%eax)
    0x812c5a9 <jit_func+153>:   add    $0x10,%esp
    0x812c5ac <jit_func+156>:   pop    %edx

and another one:

    0x812c5ae <jit_func+158>:   push   %edx

Here, with the mapped register in %ebx, push I0, the PMC and the interpreter:

    0x812c5af <jit_func+159>:   push   %ebx
    0x812c5b0 <jit_func+160>:   mov    0x8113fb8,%eax
    0x812c5b6 <jit_func+166>:   push   %eax
    0x812c5b7 <jit_func+167>:   push   $0x8113db8

and call the vtable:

    0x812c5bc <jit_func+172>:   mov    0x10(%eax),%eax
    0x812c5bf <jit_func+175>:   call   *0xdc(%eax)
    0x812c5c5 <jit_func+181>:   add    $0xc,%esp
    0x812c5c8 <jit_func+184>:   pop    %edx

As this ends the JITed section, used registers are saved back to Parrot's register:

    0x812c5ca <jit_func+186>:   mov    %ebx,0x8113db8

and again the code in cgp_core gets called:

    0x812c5d0 <jit_func+192>:   mov    $0x812ac48,%esi
    0x812c5d5 <jit_func+197>:   call   *(%esi)

which after executing the print returns back here in JIT, where the ret is called:

    0x812c5d7 <jit_func+199>:   push   $0x8113db8
    0x812c5dc <jit_func+204>:   push   $0x40014118
    0x812c5e1 <jit_func+209>:   call   0x805d5e0 <Parrot_ret>
    0x812c5e6 <jit_func+214>:   add    $0x8,%esp

From the returned PC a JIT address is calculated, which gets executed:

    0x812c5e9 <jit_func+217>:   sub    $0x400140c0,%eax
    0x812c5ef <jit_func+223>:   mov    $0x812c4a8,%edx
    0x812c5f4 <jit_func+228>:   jmp    *(%edx,%eax,1)

Now at the end opcode, the CGP code for HALT() gets jumped to:

    0x812c578 <jit_func+104>:   mov    $0x80b5877,%esi
    0x812c57d <jit_func+109>:   jmp    *%esi

which is:

    inline op end() {
      HALT();
    }

or, set return result:

    0x80b8b6f <cgp_core+13119>: xor    %eax,%eax
    ...

and clean up stack frame and ret:

    0x80bb470 <cgp_core+23616>: lea    0xffffff18(%ebp),%esp
    0x80bb476 <cgp_core+23622>: pop    %ebx
    0x80bb477 <cgp_core+23623>: pop    %esi
    0x80bb478 <cgp_core+23624>: pop    %edi
    0x80bb479 <cgp_core+23625>: mov    %ebp,%esp
    0x80bb47b <cgp_core+23627>: pop    %ebp
    0x80bb47c <cgp_core+23628>: ret

This returns after the position where cgp_core was called during the init sequence, but now the return value %eax is zero and the..

    0x812c52b <jit_func+27>:    test   %eax,%eax
    0x812c52d <jit_func+29>:    jne    0x812c536 <jit_func+38>
    0x812c52f <jit_func+31>:    pop    %ebx
    0x812c531 <jit_func+33>:    mov    %ebp,%esp
    0x812c533 <jit_func+35>:    pop    %ebp
    0x812c535 <jit_func+37>:    ret

... whole story ends here, we are back again in runops_jit.

So this is rather simple once it gets going.

BUGS

The floating point registers do not get saved to Parrot before vtable calls. This assumes that external routines preserve the FP stack pointer and don't use more the 4 floating point registers at once.

AUTHOR

Leopold Toetsch lt@toetsch.at

VERSION

CURRENT

14.02.2003 by Leopold Toetsch